Products

Marini Impianti is capable of engineering products with high-technological content within the Railway, Industrial and Military areas of application. Our core business is represented by electronic and mechanical products and systems, we design, manufacture and maintain. Our added value is the aptitude to innovate made possible by highly qualified personnel, able to face new challenges every day.

New

LoRa – CGM Radio Module for Mechanical Joint Controller

The LoRa-CGM module allows the remote monitoring over radio link of the mechanical integrity of an Insulated Block Joint (GII), as reported by the Mechanical Joint Controller (CGM) through the measure of the relative movement between the jointed rails.

Power Supply System for Level Crossing

The level crossing power supply system is an energy station able to generate a DC voltage. The power supply system guarantees the continuity…

PRODUCT DETAILS

 

Safe Data Trasmission

TDS – The main purpose of the Safe Data Transmission System (TDS) is to replace the copper cables which is the most common means used for safety link…

PRODUCT DETAILS

Battery Charger and Power Supply

ASC – The Battery Charger and Power Supply (ASC), compliant to RFI IFS330A Italian railway Specification, is a DC Uninterruptable Power Supply…

PRODUCT DETAILS

 

LED Indicator Signal

SILED – The Alphanumeric Route Indicators is a unit designed to provide auxiliary luminous indication with the scope of assisting…

PRODUCT DETAILS

Differential Detector

RD – The Differential Detector (RD) measures the True RMS current absorbed by the lamp of the Colour Light Signals Italian SDO type and excites an external relay…

PRODUCT DETAILS

 

Chronological Events Recorder

RCE – The Chronological Events Recorder (RCE) is the Black Box (Orange Box) of the Signalling System (IS). The conditions of the monitored input connected to free relays…

PRODUCT DETAILS

Continuity Control Panel

QCC – To guarantee safe access to the railway tunnel to the Rescue Teams in case of necessity, it is important to check the correct connection from the track…

PRODUCT DETAILS

 

Rail Track Temperature Monitor

MTR – The main aim of the Centralized Rail Track Temperature Diagnostic System (SDC-MTR) is to continually measure the temperature of a rail track…

PRODUCT DETAILS

Insulation Resistance Meter

MSIS – The MSIS system measures the insulation of a Sig- nalling System (IS) cable to Earth or to Equipotential Bar of the power supply system…

PRODUCT DETAILS

Flasher Unit for signals and level Crossings

LSPL – The LSPL is a device that allows flashing the Colour Light Signal at a frequency of 1Hz. Such device can be used both for Colour Light Signal…

PRODUCT DETAILS

Centralized Diagnostic System

SDC – The Centralized Diagnostic System (SDC) monitors continuously the most important electrical parameters belonging to the different Station or Line Equipment…

PRODUCT DETAILS

GSM-R Modem

The purpose of IF_GSM-R Modem is to create a data network on the GSM-R channel (Railway) between one or more devices, typically diagnostics devices…

PRODUCT DETAILS

PSK 83.3Hz Generator

The PSK 83.3Hz Generator was engineered and produced in collaboration with Tekfer Industries. It can supply track cir- cuits with 83.3Hz alternating voltage…

PRODUCT DETAILS

Delay Device

DRED – The Retarding (also called DRED), is a device capable of applying or removing the power supply to a relay connected to its output, after a pre-set time…

PRODUCT DETAILS

System for the Measurement of Vertical Loads

SMCV – The SMCV measures the vertical load transmitted by every single axle of the train in transit over the track, equipped with sensors, that constitutes the measurement…

PRODUCT DETAILS

Led signal for “SDO” and “RELE' a schermo RS” type

SAL – he Marini Impianti Industriali Colour Light LED Signal allows the substitution of traditional halogen Lamp Col- our Light Signals for Italian SDO…

PRODUCT DETAILS

Mechanical Joint Controller

CGM – The mechanical integrity of an Insulated Block Joint (GII) can be easily monitored with the CGM, a system patented by Marini Impianti Industriali…

PRODUCT DETAILS

Digital Diagnostic Interfaces for SDC

The Digital Diagnostic Interfaces are Transducers able to acquire and process analogue signals, typically voltage and/or current alternate or continuous…

PRODUCT DETAILS

 

Electronic Track Relay

REDI – Is used in Signalling Systems (IS), in particular to signal occupied/unoccupied track circuits…

PRODUCT DETAILS

Energy Measurement Recorder

RME – The RME-SSE measures and records the electrical energy supplied by the Electrical Sub-Stations (SSE) to the Overhead Line…

PRODUCT DETAILS

Electronic Pedal for Level Crossing

PEPL System – The purpose of PEPL System is to control level crossings in V301, V303, V305 and V308…

PRODUCT DETAILS

SDC Web Application Platform

The SDC Web Application Platform is designed to optimize the activities of maintenance operators in consulting the diagnostic data of railway systems…

PRODUCT DETAILS

Overhead Line Tensioning Diagnostic System

The DIAG-TE System is a system capable of detecting the correct functioning of the railway contact line tensioning system, both in 3KV and 25KVac environmen…

PRODUCT DETAILS

Electronic Pedal for Level Crossing

The LoRa-CGM module allows the remote monitoring over radio link of the mechanical integrity of an Insulated Block Joint (GII), as reported by the Mechanical…

PRODUCT DETAILS

LoRa - Dual Band Gateway

The LoRa Dual Band Gateway it is an innovative LoRaWAN Gateway for Industrial IOT applications. It uses dual-band technology 868/915 MHz and 2.4 GHz allowing…

PRODUCT DETAILS

LoRa Inclination and Vibration Monitoring Sensor

IVMS – Is a sensor specialized in detecting tower, pole and bridge integrity, monitoring vibration and inclination of infrastructure as well as landslides…

PRODUCT DETAILS

Electronic Pedal for Level Crossing

Is a 20W DC / DC Converter Switching, capable of generating a continuous output voltage of 24Vdc starting from the catenary voltage with 3KVcc nominal value…

PRODUCT DETAILS

Power Division

Power Division develops, builds and distributes custom products based on specific customer requirements, and provides after-sales service.